REBAR SPLICING SYSTEM

System designed for Rebar Splicing eliminating the rebar trespassing.

Without the reduction of section on the region with thread, all Trejor rebar splicing systems are based on the preservation of the original area of the rebars section.

  • Pressed Coupler with Thread - TCA                                                   

 

Available for the following rebars diameters: 12,5; 16; 20; 25; 32 e 40mm.

Compatibility: TCA or VR

The connection between two Pressed Couplers with Thread (TCA) is assembly through a Threaded Connecting Bar.

  • Rebar with Thread - VR:                                                   

Preservation of the original area of the rebars section without the reduction of section on the region with thread.

Available for the following rebars diameters: 12,5; 16; 20; 25; 32 e 40mm.

Compatibility: VR or TCA

The connection between two Rebars with Thread (VR) is assembly through a Coupler with Thread.

VR + TCA

  • Weldable Coupler - TLS                                            

Splicing element to connect the rebars through weld.

Available for the following rebars diameters: 12,5; 16; 20; 25 e 32mm.

  • On Site Pressing Coupler - TLP   

Splicing element to connect the rebars through on site pressing.

Available for the following rebars diameters: 12,5; 16; 20; 25 e 32mm.

Hydraulic Pressing Equipment On Site.

On Site Pressed Coupler.

© 2017 por A. R. Trejor Ltda                                                                                                                                   (11) 2914-0535